B210 Parts

Many 510 and 610 steering, suspension and brake parts fit B210

Many parts from B210 will fit B110 (and vice-versa). See article: B210 Parts Donor

See General parts for a list of many parts like headlights, battery, etc from most cars that fit will B210.

• Steering parts

• • Steering gear is same as 610, size 45 mm gear spacing. 15.0 ratio, 3.14 turns lock/lock @ 38 degrees

• • Steering column is separate from gear (B110 has integral gear/column)

• • Side rod is size of 610, but different length

• • Cross rod, differs from 610 in bend and size

• • Idler: same as 610

• • Gear arm: same as 610

• Front suspension and brakes: Many Datsun 610 parts fit B210 (USA models). These differ from B110

• • Tranverse link: 510/610 part

• • Ball joint: 610 part

• • Wheel bearing: 510/610

• • Hub: 510/610

• • Rotor 232 mm same as 510/610. B110 uses 212.5 mm

• • Caliper and pads: Annete 14/15A same as 610 (B110 uses 12/14A)

• • Strut interior parts (or insert). Larger diameter than B110

• Brakes

• • M45 Master Vac (booster) same size, but differs from 510/610

• • Brake master cylinder 5/8 bore, part is same as 610. Same bore as B110, but different mounting.

• • NP proportioning valve same as 610 (B110 has no valve)

• Engine crossmember (wider than B110)

• Diff U-bolts and mounting pads (wider)

• Rear Wheel bearings (larger)

• Lug nuts. B210 uses larger 13/16 size. B110 uses 3/4 size