Hilux Calipers

From Datsun 1200 Technical
Jump to navigation Jump to search

Toyoda Hilux/Landcruiser have compact 4-spot calipers, but they are heavy cast iron pieces.





Overview

NOTE: For light alloy 4-pot calipers, see Brake_Swaps#4-piston_Calipers


Hilux calipers are 4-pot Sumitomo S12 calipers, though heavy they are inexpensive and readily available high performance brake calipers.


Album 11491


4-pot calipers advantage * allow for not very tall, but wide brake pads * allow for small diameter wheel * look cool


Album 8493


Disadvantages * heavy (unless made of alloy) * expensive to repair * not any better than sliding calipers


Album 21911


Calipers use same bolt spacing as B310.A14 and other Datsun struts.


Caliper Bolt Spacing (dimension 'B') * 3.5 inch (88.9 mm) https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/caliper_be.jpg



Parts

RockAuto.com


  • Sumitomo S12-type for 20 mm Rotor Thickness
  • Sumitomo S13-type for 22 mm Rotor Thickness


S12+8 for 289 mm x 20 mm rotors $61 at Rockauto.com * 4WD Hilux 1979-1990 * 4WD Pickup 1986-1988 (USA) * Landcruiser 60-series 1976-1990 2 small + 2 large pistons (43 + 34 mm) * Centric 142.44014 (Left) & 142.44013 (Right) Loaded * Centric 141.44014 & 141.44013 (Semi-loaded) S12W for 20 thick mm rotors * 4WD Pickup 1992 (USA) 289 mm rotors * 43 mm bore x 4 * Sumitomo S12W for 302 mm x 20 mm rotors


S13WB for 22 mm thick rotors (low mount) * Sumitomo: 45 mm bores (1.785") Toyota 47750-35090 1992 4Runner


S13WA for 22 thick rotors (high mount) 1991-1992 Landcruiser 4.0 (USA) * Sumitomo: 45 mm bores


https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/caliper_be.jpg CALIPER DISC HEIGHT (Dimension 'E') S12W 63 mm S13WB 63 mm S13W 72.5 mm RX-7 S4 80 mm R33 80 mm



Builds

Also see: S12+8 calipers on Stanza struts


S12-8

Post 303308


s12+8 calipers - stanza strut

Post 328383


Landcruiser 4-spot conversion on a Nissan C210 Skyline strut and running FWD 14 inch wheels for the offset.


On A10 Stanza strut, vented 200B rotors (were they available vented?) with hilux/landcruiser 4-spots machined slightly to centre them over the rotor.



Discussions

Discussion: Rotor to suit Hilux caliper and stanza strut


Best rotor may be the 257mm number 40206-71E07 S13/S14/M11/C22/C33/C34/P10/WP11/R32/A31/U12/U13/U14 unit.


S12+8 

Post click for topic Post click for topic Post click for topic


Hi-lux 4-spot calipers with Nissan P10 Pintara vented discs on A10 Stanza strut

Album 1324 Album 2319


200B strut with 200B discs and Landcruiser 4 spot calipers on left strut Corona twin-piston calipers on the right

Album 9527


Sumitomo twin-piston caliper on 200B strut

Album 9436


Sumitomo twin-piston caliper on Stanza strut and 253 mm discs

Album 9585