The engine mounting insulators sit between the engine mounting brackets and the crossmember, and provides insulation from noise and vibration. They are designed with a particular rubber hardness, to give a balance between softness and rigidity.

Overview

Album 20929 Album 20925 Album 20940 Album 562

Spacers

Spacers may be used to raise the engine height

Post 498092 Post 498092

Part Numbers

All of the following insulators are interchangeable — they fit any year 1200.

Main: Engine Mounting Part Numbers

11223-H1000ᴳ INSULATOR-engine mounting, front [8 mm studs] $12.70 USD 11223-H5000ᴳ INSULATOR-ENGINE MOUNTING, FRONT 7510-8503 [8mm studs] 11223-G1900ᴳ INSULATOR-ENGINE MOUNTING, FRONT 8504- [8mm studs]

Album 20928

B10 Mounts

As you can see these Datsun 1000 parts are different from newer (B110, etc) mounts.

11223-18001 INSULATOR-engine mounting front Album 18305

^POST qik1000 used Ford Laser mounts

Custom engine mounts to suit A14/A15. I used new ford laser upper engine mounts, which are significantly larger/stiffer than the originals. This eliminates axle tramp.

1985-1990 BD/BF Mazda 323, KA/KB Ford Laser Rear Engine Mount (spacing varies from B10 mount)

https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/KB_mouint.jpg

RH stepped bracket with angle-mount insulator

Album 2569

Upgraded Insulators

Puck Type

Many favor puck-style insulators, because they are readily available in polyurethane, although OEM-style new rubber makes for less vibration. Either style insulator (stock or puck) can fit stock L-type or A-type mounts.

Universal puck-style mounts, in rubber or polyurethane

These are the heavy duty engine mounts we were talking about. Broken engine mounts are a common thing in rally cars and this fixes the problem. Mounts are polyurethane and come out of a ford cortina and last for years of competition...Part number MT8156N. Kelpro make them...I usually just go to a good parts place and ask for cortina engine mounts and this is what they give me. Maybe there are two types, these are about 70mm in dia.

Kelpro MT8156Nᴳ

Album 6215

quote: you might want to look at the poly-urathene style mounts. I am using some of a Jag. The part number is at home. but they are heaps wider but no tallers, so they make a good direct replacement, plus they are high temp rated.

MadDats heavy-duty rubber engine mountsᴳ

Post 477317

Maddat Product No - REM1200F Polyurethane Engine Mounts. Suit 1200 Reversed engine X-member (pair). New revised editions have stainless steel plates and increased re-enforcement with a slightly softer compound.

https://i297.photobucket.com/albums/mm219/ddgonzal/wiki/REM1200.jpg

Land Rover Discovery 1989-1994 V8 BRITPART STC434ᴳ £2.34

Album 18807 Album 18808