Jack

Datsun 1200s were equipped with an easy-to-use scissor-type jack. It shipped in the boot (sedan and coupe) or attached to the passenger's seat (truck and van).

Overview

See also: Changing tire

Sedan & Truck jacks differ only by the diagram (sticker) on the jack.

Album 14997 Album 24944

Cautions

Album 27446

CAUTIONS (Details: See owner's manual)

1. Use this jack on this vehicle only.

1. Set parking brake firmly and set automatic transmission in "P", manual transmission in First or Reverse.

1. Use #wheel chocks or blocks to fix other wheels.

1. Place jack at #jack-up points only.

1. Never jack up more than necessary.

1. Never get beneath vehicle when it i supported by jack.

1. Never use blocks on or under jack.

1. Park on hard level surface.

⑤

Jack-up Points

1972 USA Owners manual (Page 27 ... 27):

  [[1972#toc|]]

There are four jack-up points at the floor panel

1974 B120 Owner's Manual (Page 25 ... )

http://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/owners_manual/1974/th_00%20cover.jpg   http://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/owners_manual/1974/th_25.jpg

Jack-up Points

You can jack-up the 1200 at these points

Album 14997 Album 24944

Using OEM jack (see Owners Manual above):

• under rocker panel front notch

• under rocker panel rear notch

• truck/wagon: rear body jack point

Be sure to use a Nissan /Toyota/Subaru jack with a "slot" to fit over the rocker panel seam. Jack here, at the point of the the half-round indents:

Album 22909

Using other jacks:

• Under lower A-arm (Transverse link), near tire

• Middle of engine crossmember (lift entire front end)

• center of Differential (lift entire rear of car)

• Outboard ends of rear axle housing

CAUTION: Before sliding underneath the car, be sure to place jackstands under the suspension. In a pinch a tree stump or beefy timber can work. Make certain it is secure, and lower the weight of the car on the jackstands.

Also useful when removing/reinstalling transmission

Album 19064

Standard Equipment

• Scissor Jack

• S-shaped Jack Handle

• Wheel Wrench in black 'Nissan' tool bag

• Tire retaining clamp (sedan and coupe)

Album 14996 Album 14999

1976 Aussie Pick-up

Upload click to view

Tools

1200 Factory Tool Kit was option and the contents vary by year and region.

See #Part Numbers section below also see #Alternative Datsun Jacks

1976 AUS tool kit

Upload click to view

#Wheel Stops

Album 23615

Jack Location

The Jack and its equipment is stored in special place.

• For sedans and coupes, the jack is stored in the trunk. Sedan uses a hold-down clamp, while Coupe uses a fixed bracket (the opposite of usage for B10).

• For vans and trucks, the jack is store under the passenger side seat

Coupe

The Jack and its equipment is stored in the Trunk (Boot) on the left side against the fender. It is usually covered by the coupe trunk trimming side panel.

Album 20355

http://datsun1200.com/uploads/photos/30533.jpgAlbum 30533

Sedan

The Jack and its equipment is stored in the Trunk (Boot). Sedan uses a hold-down clamp in the spare tyre well, to the right of the tyre.

Album 6277 Album 14995

Truck

The ute Jack is stored ^POST under front of passenger's seat.

1974 B120 Owner's Manual (Page 24 ... 24)

http://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/owners_manual/1974/th_00%20cover.jpg   http://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/owners_manual/1974/th_24.jpg

The tools and jack components are stored in the storage compartment as shown. The tool bag is stowed under the assist seat.

Album 25791

Ute_floor_bracket

Post 434087

Mounts similar to this VB310 jack:

https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%20Misc/B310/brochures/SV4a.jpg

Sunny_Truck jack handle features tabs going other way truck | sedan/coupe

Post 491899 Post 491899

Post 376683 Post 376683

Album 24945 Post 491899

Post 491899

Album 24944 https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/jack1.jpg https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/jack2.jpg https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/jack3.jpg

Wagon

Wagon jack fits in front of passenger seat.

Album 27057 Album 27056

120Y wagon VB210 jack mount in engine bay

https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%20Misc/B210/VB210_1976-g.jpg

Sunny van VB310 jack

Post 491905

運転席下の邪魔にならない場斫にセットされたジャッキ。いざというとき、すぐに取り出せます。 Jack set in place out the way under the driver's seat. When it is emergency, it can be taken out immediately.

Datsun B10

1000 Sedan

Album 13868

Upgrades

Roller Jack Handle

Nissan jack handle with built-in rollers (no more pinched hands!). Source one from a more luxurious Datsun or Nissan. I got mine from a 1985 S12.

Album 23428

Wheel Stops

From B310 and many other Datsuns:

• 99595-H7400 TIRE STOPPER

Album 23615 Album 23616

Part Numbers

Tool_Kit_Part_Numbers

https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/USA/173-01.jpg

ｼﾞﾔｯｷ､ﾊﾟﾝﾀｸﾞﾗﾌ ﾀｲﾊﾟﾟ ﾊﾝﾄﾞﾙ､ｼﾞﾔｯｷ ｸﾗﾝｸ

Part Codes: 99610, 99611

• 99550-H1000 SET-JACK B110 $74.14

• 99553-H1400 HANDLE-JACK CRANK VB110P, B120 [right-angle]

• • looks similar to 99552-D0100 U11

• 99551-G1400 JACK-PANTOGRAPH TYPE B120

• 99595-18000 BAG-TOOL $3.89

Others

• 99504-50Y00 bag-tool $4.14

• 99501-01A00 tool kit-complete with jack $118.12

• 99552-01G00 rod-jack D22 [straight] $17.25

• 99553-01W00 Handle Jack 280ZX [crank] $9.33

• 02996-01100 handle-jack 310/810 [with plastic roll surfaces] $19.33

• 99595-H7400 tire stopper 810 [non-folding]

• 99595-U1400 tire stopper 280ZX [folding type] $24.30 [99595-F2700]

• 99545-8B400 Wrench-wheel Nut & jack handle Frontier $32.88

99596 oil filter wrench bag 99547 oil filter wrench 99548 oil filter wrench handle 99540 spark plug wrench

99512-25660 HAMMER 99509-Z0000

Datsun 910

99545 wrench 02995-45200 WRENCH-WHEEL NUT 99610 jack 02996-10421 JACK-PANTOGRAPH TYPE sedan [groove type a la B110] 02996-01631 JACK-PANTOGRAPH TYPE wagon [finger type]

99595 wheel stop 99595-H7400 sedan [fixed type] (2) 99595-U1400 wagon [folding type] (1) * 99595-F2700

99596 Tool bag 02995-95300 BAG-TOOL

99614 jack handle 02996-01100 HANDLE-JACK LEVER 910 sedan

99613 jack handle, 2-piece 02996-03200 ROD-JACK HANDLE wagon 99612 jack crank 02996-02100 HANDLE-JACK HANDle wagon

99501-89903 TOOL SET-STANDARD Includes: * 99545 wrench * 99596 tool bag

U11

995 TOOL KIT 99501 TOOL SET-STANDARD 99596 bag 99535 phillips driver 99545 lug wrench 99525 pliers 99507 spanner 99507 spanner

02995-07100 spanner 8x10 99507-01A00 02995-07300 spanner 12x14 99512-01A00

02995-25100 PLIER 99525-01A00

02995-30300 SCREWDRIVER/DRIVER-PLUS & MINUS [phillips + regular] 99530-50Y00 $6.12 USD * S13, R50 USA

Alternative Datsun Jacks

Not recommended. Shocking

Album 10192

620 Pickup: rotary type for heavy loads

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/282757_10150322612682387_507737386_9967102_5395102_n.jpg http://sphotos.xx.fbcdn.net/hphotos-prn1/526210_860298009146_41507110_36291832_659386670_n.jpg

521 pickup handle

https://i297.photobucket.com/albums/mm219/ddgonzal/wiki/P1000120.jpg

Long & Short handle (long one is for pickup)

https://i297.photobucket.com/albums/mm219/ddgonzal/wiki/zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzZZZZZZZZZ071.jpg

1970-1976 S30 Tool Kit

https://i297.photobucket.com/albums/mm219/ddgonzal/sightings/forum/Jack_1970-1976_S30.jpg

1977-1978 S30 Tool Kit

https://i297.photobucket.com/albums/mm219/ddgonzal/sightings/forum/Jack_1978_S30.jpg https://i297.photobucket.com/albums/mm219/ddgonzal/sightings/forum/Jack_1978_280Z.jpg

280ZX Tool Kit

https://i297.photobucket.com/albums/mm219/ddgonzal/sightings/forum/jack_S130.jpg https://i297.photobucket.com/albums/mm219/ddgonzal/sightings/forum/jack_280ZX_detail.jpg

ジャッキ 

¤