Pedals

From Datsun 1200 Technical
Jump to navigation Jump to search

Brake and Clutch pedals go in the pedal box. Next to the pedal box is mounted the Accelerator Pedal.





Overview

See also: Accelerator Pedal


The pedal boxes are the all years, and are the same manual & auto. Brake pedal width differs. Brake pedal looks the same RHD and LHD. Clutch pedal differs LHD (pushrod) vs RHD (cable pull). In Oct 1989 they changed the pedals to use a different pads — they may be interchangeable with earlier pedals.


Album 20631 Album 27059


Flasher unit is attached to the pedal box

Album 27060 Album 27061


LHD has a clutch pedal similar to the brake pedal (pushrod hole for master cylinder)

https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/Parts/willieoec-img600x450-1327301597khao5r38841.jpg https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/Parts/willieoec-img600x450-1327301597qhkfya38841.jpg https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/Parts/willieoec-img600x450-1327301597tfg2sp38841.jpg


RHD has clutch pedal of the cable-pull type (notched at the very top)

Album 25866 Album 25867


Stays (brackets) are welded to the upper dash panel. The box bolts to the stays

https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/9522_a.jpg


Steering Column bolts undeneath the front of the pedal box

Album 15949


4 bolts where it bolts to the stays 4 bolts at the front, where it bolts to tabs welded into firewall


Album 19757 Album 26627 Album 26628 Album 26629



Switch

Stop Lamp Switch | 1989-up also has Clutch Switch

Album 27059 Album 26626



Stop Lamp Switch

Normally ON switch controls the Taillights. When the pedal is up, the #Pedal Rubber pushes the switch OFF.


Stop Lamp Switch Part Numbers 25320-H1000 -8109 bullet connectors 25320-H8500 8510-8910 spade connectors 25320-A7500 8910-


H10: 620, S10

Album 26632


H85: 720, S31, N12

Album 26631


Pedal Rubber Stopper

https://pl510.info/images/2020/08/07/239217AA-CB53-4A4B-B77E-05FECC529A08.jpg☁


If the #Stopper breaks into pieces, your tail lights will come on all the time. As a temporary fix, tape or clip a coin over the hole

https://pl510.info/images/2020/08/07/FE73EE3A-C321-46D7-BFA6-936F27866365.jpg☁



Clutch Switch

8910-


clutch switch クラッチ スイッチ

Album 26630



Pedal Bushings

Pedal shaft, nut & washer with bushings fitted

https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/Parts/pedal_shaft.jpg


Remove this bolt and lubricate the bushings (grease them) every Every 12 months or 12000 miles, whichever comes first.


https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/pedal_bush.jpg https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/20631.jpg



Throttle Pedal

The accelerator is attached to the firewall, outside of the pedal box.


See main article: Accelerator Pedal



Adjustment


Brake Pedal

Album 21609


  1. Loosen the stopper nut
  1. Measure height of pedal. It should be 143.5 mm. Insert shims on outside of firewall until height is 143.5 mm
  1. Tighten stopper until height is 139.5 to 143.5 mm. Tighten stopper nut.
  1. Double-check free play (5-15 mm)
  1. Double-check total travel of pedal (120mm)



Cable Clutch Pedal

Disconnect clutch cable at gearbox end. Next, adjust the pedal stopper so the pedal height is in range from 136.5 to 146.5 mm (5.4 to 5.8 in), and secure the position with the lock nut completely. Then adjust the cable.


Pedal height: 5.57 in (141.5 mm ± 5mm)


Album 6081



Hydraulic Clutch Pedal

Pedal height: 5.57 in (141.5 mm) Pedal free play: 1.181 in (30 mm) Pedal stroke is 5.65 in (143.5 mm)


Back off the adjustment stopper, then measure. If measurement is off, change shims for the cylinder on the firewall. When pedal height is correct, adjust pedal stopper.


Album 538


Also See: Hydraulic clutch adjustment



Accelerator Pedal

See Main Article: Accelerator Pedal




Custom

Alloy pedals with non-slip pads

Album 8861


Album 12035 Album 17607 Album 8197



Part Numbers

Also See: Dash Part Numbers for the box and stays Brake Pedal Part Numbers Clutch Pedal Part Numbers


* Same: Sedan/Van/Coupe/Truck RHD 46580-H1000 STAY-bracket, pedal & steering post (R.H.) 46581-H1000 STAY-bracket, pedal & steering post (L.H.) 46570-H1001 ASS'Y-BRACKET, pedal & steering post LHD 46580-H1600 STAY-bracket, pedal & steering post (R.H.) 46581-H1600 STAY-bracket, pedal & steering post (L.H.) 46570-H1600 ASS'Y-BRACKET, pedal & steering post fixing reinforce & stay 08110-62062 BOLT-with lock washer (8) or 08110-61262 08915-53510 WASHER-plain (8)


Pedal bushing 46525-18000 BUSHING-pedal fulcrum (2) * replaced by 46525-N8200 0880-up $1.64 USD * Fits B10, B110, B210 & B310 USA & JDM



Pedal Rubber

46531-18001 COVER-PEDAL PAD for BRAKE MANUAL $2.52 46531-20301 COVER-PEDAL PAD for BRAKE AUTOMATIC NLA 46531-M3000 COVER-PEDAL PAD for CLUTCH $2.52 USD * formerly 46531-18001


46512-H0101 RUBBER-BRAKE PEDAL STOPPER $3.00 USD * Will Fit With Most Nissans https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/Parts/46512-H0101-a.jpg


46512-H0101

https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/Parts/46512-H0101.jpg


Clear: 46584-S0100, Green: 46512-H0101

https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/Parts/46512-H010146584-S0100.jpg


Broken and new parts

https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/Parts/46512-S0100_broken.jpg



B140

1400 vs 1200 boxes

https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/album/9522.jpgAlbum click to view



B210

B210 pedal box differs from B110. For example, it bolts directly to the firewall while B110 bolts to tabs on firewall.


B210 pedal box

https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/DSC03837-1a.jpgPost click for topic


Manual pedal boxes are not interchangeable with auto pedal boxes


https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/dsc03780v.jpgPost click for topic


Manual pedal boxes have an extension welded on the left side for the clutch pedal pivot

https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/dsc03781r.jpgPost click for topic


Brake booster makes a difference too (2-bolt master VS 4-bolt)

https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/dsc03756j_.jpgPost click for topic


All B210 (including 120Y) appear to have provision for a hydraulic clutch master cylinder -- though on some pedal boxes the center hole is not drilled.


B210 JDM Pedal Box MANUAL TRANSMISSION 45670-H5000 Manual A12 45670-H5800 Manual for use with booster * A12 GX,MTM OPT GL,MTM from '75-4 AUTOMATIC TRANSMISSION 45670-H5020 Automatic A12 1973-1975 45670-H5820 Automatic for use with booster * GX,ATM OPT GL,ATM from '75-4 MTM: GX マスターバック, GL ラインオプョン


Automatics have a larger brake pedal

https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/dsc03782p.jpgPost click for topic Album 26358


Datsun 521 pedal box retro-fitted to B210

Album 12306



Photo Index

Album 9525


See: Remote Clutch Master Cylinder


ブレーキ クラッチペダル 


¤


Retrieved from "https://datsun1200.tougetechnologies.com/index.php?title=Pedals&oldid=50097"