Speedometer
<-- back to Cluster Gauge
Speedometers were either in kilometers or miles. Australia started with mph and then switched to kph via sticker overlays. Some speedometers had a trip meter.
Overview
See also: Cluster Gauge
See also: Dashboard
Odograph
The odometer has five digits as shown by this 2006 unit:
When the count exceeds 99999 it turns back to 00000.
Variations
STD bar gauge
STD speedometer was a rectangular type (GL & GX used round gauges as did all coupes). DX varied: Mostly rectangular, but USA Deluxe had round gauges.
24850-B8600 B110 ute Speedometer until 1975-1978
24850-B8600 KANTO SEIKI TOKYO 160K km/h with wire for intermittent buzzer
Round gauge
http://datsun1200.com/uploads/newbb/174_67e7685d5a557.jpg
Comparo
For calibration, the MPH speedo is marked in KPH ranges on the very edge, which are partly visible when installed.
24850-H1816 100MPH w/o tripmeter (AUS/USA standard equipment)
?? 100MPH with tripmeter
1973 5mph marks
https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/2028.jpg
24850-H3400 1200 120MPH SPEEDOMETER Includes tripmeter
https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/6551.jpg
140 kph
File:1300060168 177086830 11-DATSUN-SADO-.jpg
160 kph
https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/15621.jpg
160 kph late
https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/2729.jpg
GX - 180 kph
https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/d2.jpg
#Facelift GX - 180 kph
https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/GX5/22.jpg
Matsuoka - 240 kph
B140 2008
Facelift GX
Gauges changed for the 1972 minor facelift in Japan. As before the GX speedometer went to 180km/h instead of the regular 160km/h. As with all 1972s it had the speed warning sensor.
See also: Cluster_Gauge#Facelift
https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/GX5/22.jpg
Part Numbers
Round
USA 24850-H1816 ASSY-SPEEDOMETER 100MILE/H [With 20 mph markings] 24850-H7000 ASSY-SPEEDOMETER 100MILE/H From 7/72 [With 10 mph markings] 24850-H3400 120MPH SPEEDOMETER Includes tripmeter
JDM Sunny Truck 24850-G1670 SPEEDOMETER ASSY 7804- [Round]
Rectangle
JDM Sunny Truck 24850-G1000 SPEEDOMETER ASS'Y (up to '72-6) 24850-G1001 SPEEDOMETER ASS'Y (from '72-7 for speed buzzer) > 24850-G1000 24850-G1002 SPEEDOMETER ASS'Y (from '72-12 for intermittent buzzer) > 24850-G1001 24850-B8600 SPEEDOMETER ASSY 7510-7803 [Rectangle]
JDM Meter Kaku (Bar Gauge) Through '70 Dec 24850-H1000 ASS'Y-SPEEDOMETER Std 24850-H1100 ASS'Y-SPEEDOMETER S-Dx, VDT [Van Super-Deluxe T] * with trip meter From '71 Jan 24850-H1001 ASS'Y-SPEEDOMETER S-Std 24850-H1101 ASS'Y-SPEEDOMETER S-Dx * with trip meter 24850-H1410 ASS'Y-SPEEDOMETER VS,VP [Van Standard, Van Deluxe] 24850-H1401 ASS'Y-SPEEDOMETER VDT * with trip meter
H10 ? - all red lamps
MPH Rectangle - 0-100 Miles Per Hour
B86 - Blue H.B. lamp + yellow/red zones
KPH+MPH
Metric-Imperial Conversion
Sometimes on eBay Australia you can get the vintage conversion stickers.
OR
print this on plain paper at 125%, for a test fit. If you like it, print on sticker stock then apply to the speedometer
OR
Take the face plate and scan it on the flatbad scanner, then modify it. Finally, print a new one out with the photo printer. You can modify the font, colors, etc. You might think you can simply bolt it to the speedo using the standard screws, but it will not lay flat. Adhesive paper (sticker paper) will work
Speedometer Calibration
It is normal for the speedometer to read fast. The specified tolerance is +5% -10%. So at actual 60mph it can read 57 to 66 and still be acceptable. But you can blueprint the speedometer to be closer to the actual speed.
Main: Speedometer Calibration
Amplifier Speed Switch
1972 Japan, Australia late utes and 1973 USA used a speed switch.
Main: Speed Switch
Speed Buzzer
Starting in 1972, all JDM speedometer came with speed switch-activated buzzer (Kinkon Chime) for warning of excess velocity.
Main: Speed Buzzer
Alternatives
Possible fit: POST Smith's guage from a Triumph
VDO
220km/h coversion from Matsuoka-M
Custom Faces
Main: Custom Dash Faces
https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/speedo_x_th.jpg
Z Speedometer
280Z speedometer fits in the 1200 dash cluster.
https://i297.photobucket.com/albums/mm219/ddgonzal/wiki/001.jpg
- Swap the mounting cups as the 280Z unit is deeper
- Drill a hole for the trip meter shaft through the back
- The face is to large for the opening in the 1200 housing, so carefully reduce the diameter by 1/8 inch
350Z speedometer looks a similar size.
Electronic Speedometer
Yes, you can fit an electronic speedometer into a 1200.
Main: Electronic Speedometer
Speedometer Cable
Main: Speedometer Cable
Drive Ratios
Main: Speedometer Gears
https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/19T.jpg
Photo Index
Main: Round Dash Photo Index
スピードメーター
¤