Got rims with too much positive offset? Using wheel spacers may fix it. Or have rims with a different bolt pattern? Conversion spacers can fit 5-lug or other rims to the Datsun 1200.

Overview

Hub-centric means they center on the hub. Datsun 1200 uses 71mm hub registration diameter - so 66 mm hubcentric for S13 won't fit, unless the center hole of the spacer is drilled out larger.

Have them machined to 71mm center hole

Post 428278

https://img.photobucket.com/albums/ac66/1200rallycar//IMAG0572.jpg

For example, +30 wide wheels fit the rear fine, but need a +15 spacer on the front.

Sources

http://ebay.com - search for: 4x114.3 M12x1.25 wheel spacers or 4-on-4.5 4-lug wheel spacers

Autobarn GKTech

Simple Spacers

Thin spacers do not have studs, they simply fit between the hub and the wheel -- the the stock studs go through them.

Except for the thinnest 1/4" (6 mm ) spacers, longer studs are needed. Stock are M12 x 1.25 32mm long. Knurl Diameter: 13.00mm

Longer 55 mm versions (which are really long)

* NISMO 40222-A0220 [2" long/51mm] * For B110 front, 510 front * Knurl Diameter: 12.90mm

These match the NISMO but are shorter: length 45.5mm

* 40222-15C01 GC22 Van $2.12 USD each

For more choices, see Wheel Studs.

caution

Bolt-On

Bolt on spacers need to have M12 x 1.25 studs.

Album click to view Album click to view Album click to view

Weds Gear 15mm spacers

http://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/th_weds_gear_wheel_spacers-315mm.jpg http://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/th_weds_gear_wheel_spacers-1.jpg http://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/th_weds_gear_wheel_spacers-2.jpg

PCD Conversions

Pitch Circle Diameter (also known as Bolt Circle) for Datsun 1200 is 4.5 inch (metric equivalent: 114.3 mm). Bolt-on spacers with a different external PCD allow you to bolt on different wheels.

4/114.3 to 5/114.3

https://i297.photobucket.com/albums/mm219/ddgonzal/wiki/PCD-convertor.jpg

100 PCD rims on 1200