The Datsun 1200 has a unibody design made out of high-strength steel. It does not use Body-on-Frame construction. The result is a lighter, stronger and stiffer chassis.

Front Panels

Core Support & Apron

The main front body panel is the Core Support, so named because it supports the radiator core. To this is fastened the Front Apron (valence) finishing panel.

Main: Core Support and Apron

Minor differences are with the Coupe and Sedan panels, and with the late ute panel.

Front Fender Panel

For fender/guard/wing, see main article: Front Fender and Front End

Hood Ledge & Hood Panel

See main articles: Hood (bonnet) Front Fender and Front End

Cowl Panels (Firewall & Dash)

See Main Article: Cowl

Roof Panel

See main article: Roof

Floor Panels

See main article: Floor

Side Panels

See Main Article: Body Side Panels

Door Panels

See Main Article: Doors

Rear Side Panels

https://i297.photobucket.com/albums/mm219/ddgonzal/1971/103-0D.jpg

Main: Body Side Panels

Includes * Dash side * Hood Ledge Reinforcement * Rear Wheel House * Roof Rail * Shock Bracket Panel * Sills * Quarter Panels (rear fender) Album click to view * Tray Sides Album click to view Album click to view * Pillars

Rear Panels

Coupe Rear Panels

Album 21412

Sedan Rear Panels

Album 23212 Album 20789

https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/1971/103-06a.jpg Album 20788

https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/1972/175-06a.jpg 119 76613-H1000 PANEL-rear pillar (L.H.) 4 door [HAS BEEN CUT] Album 26247

Rear Fender

Also known as the rear quarter panel. For the coupe & sedan, the Rear Fender includes the C-pillar.

Rear_Body_Part_Numbers

Album 21415

Drain Plug

1200 COUPE REAR FENDER DRAIN PLUG

Album 28206

Bulletin Number: TS71-20 Date: March 29, 1971 Classification Number: Section: Body and Frame Models: KLB110

On some early KLB110 models, dust may enter through the water drain holes on the bottom of each rear fender. To prevent this situation, a new drain plug is now available to block these openings

Part Name: Drain Plug New Part No: 74993-73000

AMC 730 designed for P130 Nissan Cedricᵂ 1968

74993-73000ᴳ * KB110 1200 Coupe 1970-1973 * 510 Trunk Floor side plug * 130 Cedric 1968-1971

Post 496137

Rear Panel

Sometimes called a beaver panel, however the 1200 rear panel is one piece:

79100-H1000 ASS'Y PANEL-rear Sedan H2800 PB110 Sedan [flat panel] H3100 1972 79100-H1800 ASS'Y PANEL-rear Coupe 79100-H1400 ASS'Y PANEL-rear Van

Coupe

Upload click to view Album 17796

Album 2633 Album 14005

Sedan

https://i297.photobucket.com/albums/mm219/ddgonzal/wiki/79100-H1000.jpg https://i297.photobucket.com/albums/mm219/ddgonzal/wiki/79100-H1000_.jpg https://i297.photobucket.com/albums/mm219/ddgonzal/wiki/79100-H1000-.jpg Album 20121

Rear Panel Fitting - Coupe

1970-1971 Coupe GX and all 1972 coupe (DX,GL,GL) came with a rear panel finisher.

early GX Coupe black-out rear panel | 1972

Album 22562 Album 21081

GX 79801-H4200 1972 FINISHER-rear panel, center 79202-H4025 1972 ORNAMENT SET-rear panel 79801-H2400 1970 FINISHER-rear panel, center 79202-H1826 1970 SET-ORNAMENT, REAR PANEL COUPE 79802-H2400 FINISHER-rear panel side, upper RH 79803-H2400 FINISHER-rear panel side, upper LH 79804-H2400 FINISHER-rear panel side, lower RH 79805-H2400 FINISHER-rear panel side, lower LH

1972 DX,GL 79801-H4000 FINISHER-rear panel, center 79802-H4000 FINISHER-rear panel side, upper RH 79803-H4000 FINISHER-rear panel side, upper LH 79804-H4000 FINISHER-rear panel side, lower RH 79805-H4000 FINISHER-rear panel side, lower LH

GL 1972 - gray finisher?

https://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/Brochures/p2.jpg

GX 1972

Post click for topic Post 487016 Post 486798 Post 486798

Post 489450

Trunk/Boot Lid

Main: Trunk

Ute

Back Panels

Album 23214

* Back Door — see Tailgate * Rear Fenders — see Truck Rear Quarters * Rear Fender Ends * Rear Lower Panel 79110-G1001 (Beaver Panel/beaver bar/Rear Fascia Valence Panel)

Rear Lower Panel

The rear lower panel (the bit below the tailgate). The small round tailgate bumpers attach to this.

Beaver Panel/beaver bar (a.k.a. Rear Fascia Valence Panel)

Album 28380

The cutout is for the license plate

Album 10208 Album 28381 Album 28382

The round gate bumpers attach here:

Album 28383 Album 2710

Rear Floor

Rear Floor Panel

Main: Truck Rear Floor Panel

Rear Gate Panel

Main: Tailgate

Exterior Fitting

See main articles: Badges emblems, marks, IDs Colors Radiator Grille

Misc

78130-H1000 Lid-gas Filler SEDAN $18.83

Roof Drip Moulding

Rain gutters for USA & JAPAN are the same.

Album 23902

The rear piece differs 2dr, 4dr, Van

Truck doesn't have a rear piece

Coupe front & rear pieces are unique

Coupe

73800-H1800 SET-MOULDING ROOF DRIP RH 73810-H1800 MOULDING-ROOF DRIP FRONT RH 73812-H1800 MOULDING-ROOF DRIP REAR RH 73801-H1800 SET-MOULDING ROOF DRIP LH 73811-H1800 MOULDING-ROOF DRIP FRONT LH 73813-H1800 MOULDING-ROOF DRIP REAR LH 73800-H1801 SET-MOULDING ROOF DRIP RH (from '70-May) 73810-H1801 MOULDING-ROOF DRIP FRONT RH 73812-H1801 MOULDING-ROOF DRIP REAR RH 73801-H1801 SET-MOULDING ROOF DRIP LH (from '70-May) 73811-H1801 MOULDING-ROOF DRIP FRONT LH 73813-H1801 MOULDING-ROOF DRIP REAR LH 73815-H1100 CLIP-MOULDING ROOF DRIP [center clip]

Sedan & Van

STD models had no drip rails.

73800-H1100 SET-MOULDING-drip roof 4S 73800-H1300 SET-MOULDING ROOF DRIP 2S 73800-H1300 SET-MOULDING ROOF DRIP V-DX,VP

Sets include 73815-H1100 CLIP-MOULDING ROOF DRIP [center clip] 73810-H1100 MOULDING-ROOF DRIP FRONT RH 73811-H1100 MOULDING-ROOF DRIP FRONT LH 2-dr 73812-H1300 MOULDING-ROOF DRIP REAR RH 73813-H1300 MOULDING-ROOF DRIP REAR LH 4-dr 73812-H1100 MOULDING-drip roof, rear (R.H.) 73813-H1100 MOULDING-drip roof, rear (L.H.) Van 73812-H1500 MOULDING-drip roof, rear (R.H.) 73813-H1500 MOULDING-drip roof, rear (L.H.)

Truck

73810 73812-G1000 MOULDING-ROOF DRIP, FRONT RH 73811 73813-G1000 MOULDING-ROOF DRIP, FRONT LH

Album 23901

Interior Fitting

See main article: Interior

Scuff Plate

See Kicking Plate

Aftermarket Suppliers

Most of these body panel manufacturers have a minimum sale of a full cargo container or 100 units. So look for a local distributor.

CHUNG FU CHING - Taiwan cfc-autoparts.com.tw☁ * DS057112AL Left Door (4-dr, van, truck) Album 26212 * Hood#15301 Album 15301

Auto Parts Industrial (API) AP AUTO PARTS INDUSTRIAL LTD.☁ 2015 http://www.autostone.com/contactus.aspᴬᴿᶜᴴᴵⱽᴱ Cornerstone AP/Autostone crash parts * Detroit office and Dallas office * We sell Auto Crash Parts to distributors on container base. * DT20-013-0 DATSUN 1200 -73 FRT APRON LOWER * DT20-015-0 DATSUN 1200 BONNET (Sedan / Ute) * DT20-016-1 DATSUN 1200 FR GUARD RH (Sedan / Ute) * DT20-016-2 DATSUN 1200 FR GUARD LH (Sedan / Ute) * DT20-077-0 DATSUN 1200 TAILGATE

AG Parts☁ (Auto Global Parts Industries) out of Malaysia * DS101-02 hood http://datsun1200.com/uploads/newbb/174_68b4ded89e862.jpgPost 71223

AG Parts REPLACEMENT PART FENDER FOR (DS101-01 XY-R) RH http://datsun1200.com/uploads/photos/31250.jpgAlbum 31250

¤

Rear Body

Contents