Water Box

From Datsun 1200 Technical
Jump to navigation Jump to search

The Datsun 1200 has a unibody design made out of high-strength steel. It does not use Body-on-Frame construction. The result is a lighter, stronger and stiffer chassis.





Front Panels


Core Support & Apron

The main front body panel is the Core Support, so named because it supports the radiator core. To this is fastened the Front Apron (valence) finishing panel.



Minor differences are with the Coupe and Sedan panels, and with the late ute panel.



Front Fender Panel

For fender/guard/wing, see main article: Front Fender and Front End



Hood Ledge & Hood Panel

See main articles: Hood (bonnet) Front Fender and Front End




Cowl Panels (Firewall & Dash)

See Main Article: Cowl




Roof Panel

See main article: Roof



Floor Panels

See main article: Floor



Side Panels

See Main Article: Body Side Panels



Door Panels

See Main Article: Doors



Rear Side Panels

http://i297.photobucket.com/albums/mm219/ddgonzal/1971/103-0D.jpg



Includes * Dash side * Hood Ledge Reinforcement * Rear Wheel House * Roof Rail * Shock Bracket Panel * Sills * Quarter Panels (rear fender) Album click to view * Tray Sides Album click to view Album click to view * Pillars



Rear Panels

See also: Trunk Lid




Coupe Rear Panels

Album 21412



Sedan Rear Panels

Album 23212 Album 20789


http://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/1971/103-06a.jpg Album 20788


http://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/1972/175-06a.jpg 119 76613-H1000 PANEL-rear pillar (L.H.) 4 door [HAS BEEN CUT] Album 26247



Rear Fender

Also known as the rear quarter panel. For the coupe & sedan, the Rear Fender includes the C-pillar.


Rear_Body_Part_Numbers

Album 21415



Drain Plug

1200 COUPE REAR FENDER DRAIN PLUG

Album 28206


Bulletin Number: TS71-20 Date: March 29, 1971 Classification Number: Section: Body and Frame Models: KLB110


On some early KLB110 models, dust may enter through the water drain holes on the bottom of each rear fender. To prevent this situation, a new drain plug is now available to block these openings


Part Name: Drain Plug New Part No: 74993-73000


AMC 730 designed for P130 Nissan Cedricᵂ 1968


74993-73000ᴳ * KB110 1200 Coupe 1970-1973 * 510 Trunk Floor side plug * 130 Cedric 1968-1971


Post 496137



Rear Panel

Sometimes called a beaver panel, however the 1200 rear panel is one piece:


79100-H1000 ASS'Y PANEL-rear Sedan H2800 PB110 Sedan [flat panel] H3100 1972 79100-H1800 ASS'Y PANEL-rear Coupe 79100-H1400 ASS'Y PANEL-rear Van


Coupe

Upload click to view Album 17796


Album 2633 Album 14005


Sedan

http://i297.photobucket.com/albums/mm219/ddgonzal/wiki/79100-H1000.jpg http://i297.photobucket.com/albums/mm219/ddgonzal/wiki/79100-H1000_.jpg http://i297.photobucket.com/albums/mm219/ddgonzal/wiki/79100-H1000-.jpg Album 20121



Rear Panel Fitting - Coupe

1970-1971 Coupe GX and all 1972 coupe (DX,GL,GL) came with a rear panel finisher.


early GX Coupe black-out rear panel | 1972

Album 22562 Album 21081


GX 79801-H4200 1972 FINISHER-rear panel, center 79202-H4025 1972 ORNAMENT SET-rear panel 79801-H2400 1970 FINISHER-rear panel, center 79202-H1826 1970 SET-ORNAMENT, REAR PANEL COUPE 79802-H2400 FINISHER-rear panel side, upper RH 79803-H2400 FINISHER-rear panel side, upper LH 79804-H2400 FINISHER-rear panel side, lower RH 79805-H2400 FINISHER-rear panel side, lower LH


1972 DX,GL 79801-H4000 FINISHER-rear panel, center 79802-H4000 FINISHER-rear panel side, upper RH 79803-H4000 FINISHER-rear panel side, upper LH 79804-H4000 FINISHER-rear panel side, lower RH 79805-H4000 FINISHER-rear panel side, lower LH


GL 1972 - gray finisher?

http://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/Brochures/p2.jpg


GX 1972

Post click for topic Post 487016 Post 486798 Post 486798


Post 489450



Trunk/Boot Lid

Main: Trunk



Ute


Back Panels

Album 23214


* Back Door — see Tailgate * Rear Fenders — see Truck Rear Quarters * Rear Fender Ends * Rear Lower Panel 79110-G1001 (Beaver Panel/beaver bar/Rear Fascia Valence Panel)



Rear Lower Panel

The rear lower panel (the bit below the tailgate). The small round tailgate bumpers attach to this.


Beaver Panel/beaver bar (a.k.a. Rear Fascia Valence Panel)

Album 28380


The cutout is for the license plate

Album 10208 Album 28381 Album 28382


The round gate bumpers attach here:

Album 28383 Album 2710



Rear Floor


Rear Floor Panel



Rear Gate Panel

Main: Tailgate



Exterior Fitting

See main articles: Badges emblems, marks, IDs Colors Radiator Grille



Misc

  • 78130-H1000 Lid-gas Filler SEDAN $18.83



Roof Drip Moulding

Rain gutters for USA & JAPAN are the same.


Album 23902


  • The rear piece differs 2dr, 4dr, Van
  • Truck doesn't have a rear piece
  • Coupe front & rear pieces are unique



Coupe

73800-H1800 SET-MOULDING ROOF DRIP RH 73810-H1800 MOULDING-ROOF DRIP FRONT RH 73812-H1800 MOULDING-ROOF DRIP REAR RH 73801-H1800 SET-MOULDING ROOF DRIP LH 73811-H1800 MOULDING-ROOF DRIP FRONT LH 73813-H1800 MOULDING-ROOF DRIP REAR LH 73800-H1801 SET-MOULDING ROOF DRIP RH (from '70-May) 73810-H1801 MOULDING-ROOF DRIP FRONT RH 73812-H1801 MOULDING-ROOF DRIP REAR RH 73801-H1801 SET-MOULDING ROOF DRIP LH (from '70-May) 73811-H1801 MOULDING-ROOF DRIP FRONT LH 73813-H1801 MOULDING-ROOF DRIP REAR LH 73815-H1100 CLIP-MOULDING ROOF DRIP [center clip]



Sedan & Van

STD models had no drip rails.


73800-H1100 SET-MOULDING-drip roof 4S 73800-H1300 SET-MOULDING ROOF DRIP 2S 73800-H1300 SET-MOULDING ROOF DRIP V-DX,VP


Sets include 73815-H1100 CLIP-MOULDING ROOF DRIP [center clip] 73810-H1100 MOULDING-ROOF DRIP FRONT RH 73811-H1100 MOULDING-ROOF DRIP FRONT LH 2-dr 73812-H1300 MOULDING-ROOF DRIP REAR RH 73813-H1300 MOULDING-ROOF DRIP REAR LH 4-dr 73812-H1100 MOULDING-drip roof, rear (R.H.) 73813-H1100 MOULDING-drip roof, rear (L.H.) Van 73812-H1500 MOULDING-drip roof, rear (R.H.) 73813-H1500 MOULDING-drip roof, rear (L.H.)



Truck

73810 73812-G1000 MOULDING-ROOF DRIP, FRONT RH 73811 73813-G1000 MOULDING-ROOF DRIP, FRONT LH


Album 23901



Interior Fitting

See main article: Interior



Scuff Plate

See Kicking Plate



Aftermarket Suppliers

Most of these body panel manufacturers have a minimum sale of a full cargo container or 100 units. So look for a local distributor.


CHUNG FU CHING - Taiwan * DS057112AL Left Door (4-dr, van, truck) Album 26212


Auto Parts Industrial (API) http://www.autostone.com/contactus.asp * We sell Auto Crash Parts to distributors on container base. * DT20-013-0 DATSUN 1200 -73 FRT APRON LOWER * DT20-015-0 DATSUN 1200 BONNET (Sedan / Ute) * DT20-016-1 DATSUN 1200 FR GUARD RH (Sedan / Ute) * DT20-016-2 DATSUN 1200 FR GUARD LH (Sedan / Ute) * DT20-077-0 DATSUN 1200 TAILGATE


eBay seller: Pedromxi 


¤